Elbow Type
Size Chart
| Pipe ND | Pipe Diameter | T (mm) | Applicable Pipe Diameter Range (mm) | Pressure Tolerance (bar) | Elbow Type | |||
| Length (mm) | Torque (Nm) | |||||||
| (mm) | (inch) | A | B | |||||
| 15A | 20.0 | 38.0 | 19.5 ~ 21.3 | 36 | 26.5 | 13 | 3 ~ 5 | |
| 21.7 | 1/2 | 39.0 | 21.0 ~ 23.0 | 36 | 26.5 | 13 | 3 ~ 5 | |
| 20A | 25.0 | 43.0 | 24.0 ~ 26.5 | 36 | 26.5 | 13 | 3 ~ 5 | |
| 27.2 | 3/4 | 45.0 | 26.0 ~ 28.5 | 36 | 26.5 | 13 | 3 ~ 5 | |
| 28.2 | 46.0 | 26.4 ~ 29.5 | 36 | 26.5 | 13 | 3 ~ 5 | ||
| 25A | 30.0 | 48.0 | 29.0 ~ 31.5 | 36 | 26.5 | 13 | 3 ~ 5 | |
| 32.0 | 50.0 | 31.0 ~ 33.5 | 36 | 26.5 | 13 | 3 ~ 5 | ||
| 34.0 | 1 | 52.0 | 33.0 ~ 35.5 | 36 | 26.5 | 13 | 3 ~ 5 | |
| 32A | 38.0 | 56.0 | 37.0 ~ 39.5 | 36 | 26.5 | 13 | 3 ~ 5 | |
| 40.0 | 58.0 | 39.5 ~ 41.8 | 36 | 26.5 | 13 | 3 ~ 5 | ||
| 42.7 | 1 1/4 | 61.0 | 42.0 ~ 44.5 | 36 | 26.5 | 13 | 3 ~ 5 | |
| 44.5 | 62.5 | 44.0 ~ 46.5 | 36 | 26.5 | 13 | 3 ~ 5 | ||
| 40A | 48.6 | 1 1/2 | 66.0 | 47.5 ~ 50.5 | 36 | 26.5 | 13 | 3 ~ 5 |
| 50.8 | 68.8 | 49.2 ~ 51.5 | 36 | 26.5 | 13 | 3 ~ 5 | ||
| 50A | 54.0 | 78.6 | 53.0 ~ 56.0 | 32 | 42 | 20 | 12 ~ 15 | |
| 57.0 | 81.6 | 56.0 ~ 59.0 | 32 | 42 | 20 | 12 ~ 15 | ||
| 60.5 | 2 | 85.0 | 59.0 ~ 62.0 | 32 | 42 | 20 | 12 ~ 15 | |
| 63.0 | 87.6 | 62.0 ~ 65.0 | 32 | 42 | 20 | 12 ~ 15 | ||
| 65A | 66.7 | 91.3 | 65.4 ~ 69.0 | 32 | 42 | 20 | 12 ~ 15 | |
| 69.0 | 93.6 | 68.0 ~ 72.0 | 32 | 42 | 20 | 12 ~ 15 | ||
| 73.0 | 97.6 | 72.5 ~ 76.5 | 32 | 42 | 20 | 12 ~ 15 | ||
| 76.3 | 2 1/2 | 101.0 | 75.0 ~ 79.0 | 32 | 42 | 20 | 12 ~ 15 | |
| 80A | 79.9 | 103.9 | 78.8 ~ 83.0 | 28 | 53 | 28.5 | 20 ~ 25 | |
| 84.0 | 108.0 | 82.5 ~ 86.0 | 28 | 53 | 28.5 | 20 ~ 25 | ||
| 89.1 | 3 | 113.1 | 88.0 ~ 92.0 | 28 | 53 | 28.5 | 20 ~ 25 | |
| 100A | 104.0 | 128.0 | 102.0 ~ 106.0 | 28 | 53 | 28.5 | 20 ~ 25 | |
| 106.3 | 130.3 | 105.0 ~ 108.5 | 28 | 53 | 28.5 | 20 ~ 25 | ||
| 108.0 | 132.0 | 106.0 ~ 110.0 | 28 | 53 | 28.5 | 20 ~ 25 | ||
| 114.3 | 4 | 138.3 | 113.0 ~ 118.0 | 28 | 53 | 28.5 | 20 ~ 25 | |
| 125A | 127.0 | 151.0 | 125.0 ~ 129.5 | 24 | 53 | 28.5 | 30 ~ 32 | |
| 129.0 | 153.0 | 127.5 ~ 131.0 | 24 | 53 | 28.5 | 30 ~ 32 | ||
| 133.0 | 157.0 | 131.0 ~ 135.5 | 24 | 53 | 28.5 | 30 ~ 32 | ||
| 139.8 | 5 | 163.8 | 138.0 ~ 142.5 | 24 | 53 | 28.5 | 30 ~ 32 | |
| 141.3 | 165.3 | 139.5 ~ 144.0 | 24 | 53 | 28.5 | 30 ~ 32 | ||
| 150A | 154.0 | 178.0 | 151.5 ~ 156.0 | 24 | 53 | 28.5 | 30 ~ 32 | |
| 159.0 | 183.0 | 156.0 ~ 161.0 | 24 | 53 | 28.5 | 30 ~ 32 | ||
| 165.2 | 6 | 189.2 | 164.0 ~ 168.5 | 24 | 53 | 28.5 | 30 ~ 32 | |
| 168.3 | 192.3 | 166.0 ~ 170.5 | 24 | 53 | 28.5 | 30 ~ 32 | ||
| 200A | 200.0 | 225.0 | 198.0 ~ 203.5 | 20 | 58 | 33 | 32 ~ 35 | |
| 204.0 | 229.0 | 202.0 ~ 206.5 | 20 | 58 | 33 | 32 ~ 35 | ||
| 216.3 | 8 | 241.3 | 214.0 ~ 219.0 | 20 | 58 | 33 | 32 ~ 35 | |
| 219.1 | 244.1 | 216.5 ~ 222.0 | 20 | 58 | 33 | 32 ~ 35 | ||
| 250A | 254.0 | 279.0 | 251.0 ~ 257.0 | 20 | 58 | 33 | 32 ~ 35 | |
| 267.4 | 10 | 292.4 | 262.0 ~ 270.0 | 20 | 58 | 33 | 32 ~ 35 | |
| 273.1 | 298.1 | 270.0 ~ 277.0 | 20 | 58 | 33 | 32 ~ 35 | ||
| 300A | 304.0 | 329.0 | 301.5 ~ 309.0 | 20 | 59 | 33 | 45 ~ 50 | |
| 318.5 | 12 | 343.5 | 316.0 ~ 323.0 | 20 | 59 | 33 | 45 ~ 50 | |
| 323.9 | 348.9 | 322.0 ~ 329.0 | 20 | 59 | 33 | 45 ~ 50 | ||
| 350A | 355.6 | 14 | 380.6 | 352.0 ~ 361.0 | 20 | 59 | 33 | 45 ~ 50 |
| 400A | 406.4 | 16 | 431.4 | 402.0 ~ 411.0 | 20 | 59 | 33 | 55 ~ 60 |
| 450A | 457.2 | 18 | 482.2 | 453.0 ~ 460.0 | 14 | 59 | 33 | 55 ~ 60 |
| 500A | 508.0 | 20 | 533.0 | 504.0 ~ 512.0 | 14 | 59 | 33 | 65 ~ 70 |
45
Repair Pipe Clamp Elbow Type FAQ
1. When should elbow type clamps be used? Are all elbow pipes applicable?
- If welding is used for joint connections in elbow pipes, both the welded joints and the curved sections can be used.
- If joints are connected using connectors or threaded grooves, they are not suitable for use. Please use socket type repair pipe clamps for threaded connections at joints.
2. Can the clamps be used when the pipes are close to the wall or other pipes? What is the thickness of the clamps?
The clamp thickness can be calculated from the specification table: (T – Pipe Outer Diameter) / 2. For example, the clamp thickness for a standard pipe with a nominal size of 100A is calculated as (138.3 – 114.3) / 2 = 12 mm.
3. Are the clamps applicable to all types of pipes?
Glass pipes and flexible hoses are not suitable for use. Sanitary pipes with food-grade liquids inside are also not suitable for use.
FAQ
What is the durability/lifespan of the pipe clamp?
Under normal operating conditions, the durability/lifespan of the pipe clamp can reach 15 to 20 years or more.
Are pipe clamps reusable?
Yes they are reusable.
Any special treatment required If the leak is at a weld joint?
Generally, it is possible to install directly at the weld joint, but if the weld joint is significantly raised, it may require grinding for smooth installation. If uncertain, please consult with our sales representative.
How do I select the required specifications?
Please measure the outer diameter of the pipe you intend to use and visit the repair pipe clamp specification page to select the appropriate specifications. If you are unsure about the specifications, you can consult directly with our sales representative.
What are your region of sales?
Currently we are able to provide service and free international shipping to the following countries and regions: Hong Kong, Vietnam, Thailand, Singapore and Malaysia.
Is there a minimum order quantity?
No. There is no minimum order quantity.
When is the earliest possible delivery date?
Product will be shipped on the day of orde if stick is available. Actual delivery date depends on shipping and custom condidtions.
Do I need to pay for shippping?
No. We offer free international shipping to all our sales regions.