Standard Type
Standard Type Long
Size Chart
| Pipe ND | Pipe Diameter | T (mm) | Applicable Pipe Diameter Range (mm) | Pressure Tolerance (bar) | Standard Type | Standard Type Long | |||||
| Length (mm) | Torque (Nm) | Length (mm) | Torque (Nm) | ||||||||
| (mm) | (inch) | A | B | A | B | ||||||
| 15A | 20.0 | 38 | 19.5 ~ 20.5 | 40 | 57.5 | 20 | 3~5 | 72.5 | 40.5 | 3~5 | |
| 21.7 | 1/2 | 38 | 21.0 ~ 22.0 | 40 | 57.5 | 20 | 3~5 | 72.5 | 40.5 | 3~5 | |
| 20A | 25.0 | 47 | 24.0 ~ 26.0 | 40 | 57.5 | 20 | 4~6 | 72.5 | 40.5 | 4~6 | |
| 27.2 | 3/4 | 47 | 26.0 ~ 28.0 | 40 | 57.5 | 20 | 4~6 | 72.5 | 40.5 | 4~6 | |
| 28.2 | 47 | 26.4 ~ 29.0 | 40 | 57.5 | 20 | 4~6 | 72.5 | 40.5 | 4~6 | ||
| 25A | 30.0 | 52 | 29.0 ~ 31.0 | 40 | 57.5 | 20 | 4~6 | 101 | 56 | 5~8 | |
| 32.0 | 52 | 31.0 ~ 33.0 | 40 | 57.5 | 20 | 4~6 | 101 | 56 | 5~8 | ||
| 34.0 | 1 | 52 | 33.0 ~ 35.0 | 40 | 57.5 | 20 | 4~6 | 101 | 56 | 5~8 | |
| 32A | 38.0 | 64 | 37.0 ~ 39.0 | 40 | 57.5 | 20 | 10~12 | 101 | 56 | 10~12 | |
| 40.0 | 64 | 39.5 ~ 41.3 | 40 | 57.5 | 20 | 10~12 | 101 | 56 | 10~12 | ||
| 42.7 | 1 1/4 | 64 | 42.0 ~ 44.0 | 40 | 57.5 | 20 | 10~12 | 101 | 56 | 10~12 | |
| 44.5 | 64 | 44.0 ~ 46.0 | 40 | 57.5 | 20 | 10~12 | 101 | 56 | 10~12 | ||
| 40A | 48.6 | 1 1/2 | 68 | 47.5 ~ 49.5 | 40 | 57.5 | 22.5 | 10~12 | 101 | 56 | 10~12 |
| 50.8 | 68 | 49.2 ~ 51.5 | 40 | 57.5 | 22.5 | 10~12 | 101 | 56 | 15~18 | ||
| 50A | 54.0 | 84 | 53.0 ~ 55.0 | 36 | 81 | 30.6 | 15~18 | 140 | 85 | 15~18 | |
| 57.0 | 84 | 56.0 ~ 58.0 | 36 | 81 | 30.6 | 15~18 | 140 | 85 | 15~18 | ||
| 60.5 | 2 | 84 | 59.0 ~ 61.5 | 36 | 81 | 30.6 | 15~18 | 140 | 85 | 15~18 | |
| 63.0 | 84 | 62.0 ~ 64.0 | 36 | 81 | 30.6 | 15~18 | 140 | 85 | 15~18 | ||
| 65A | 66.7 | 101 | 65.4 ~ 68.3 | 36 | 81 | 30.6 | 15~18 | 140 | 85 | 15~18 | |
| 69.0 | 101 | 68.5 ~ 71.0 | 36 | 81 | 30.6 | 15~18 | 140 | 85 | 15~18 | ||
| 73.0 | 101 | 72.5 ~ 75.5 | 36 | 81 | 30.6 | 15~18 | 140 | 85 | 15~18 | ||
| 76.3 | 2 1/2 | 101 | 75.0 ~ 78.0 | 36 | 81 | 30.6 | 15~18 | 140 | 85 | 40~50 | |
| 80A | 79.9 | 117 | 78.8 ~ 82.0 | 32 | 108.3 | 51 | 40~50 | 204 | 122.7 | 40~50 | |
| 84.0 | 117 | 82.5 ~ 85.5 | 32 | 108.3 | 51 | 40~50 | 204 | 122.7 | 40~50 | ||
| 89.1 | 3 | 117 | 88.0 ~ 91.0 | 32 | 108.3 | 51 | 40~50 | 204 | 122.7 | 40~50 | |
| 90A | 101.6 | 142 | 100.0 ~ 103.0 | 32 | 108.3 | 51 | 40~50 | 204 | 122.7 | 40~50 | |
| 100A | 104.0 | 142 | 102.0 ~ 105.0 | 32 | 108.3 | 51 | 40~50 | 204 | 122.7 | 40~50 | |
| 106.3 | 142 | 105.0 ~ 107.5 | 32 | 108.3 | 51 | 40~50 | 204 | 122.7 | 40~50 | ||
| 108.0 | 142 | 106.0 ~ 109.0 | 32 | 108.3 | 51 | 40~50 | 204 | 122.7 | 40~50 | ||
| 114.3 | 4 | 142 | 113.0 ~ 116.0 | 32 | 108.3 | 51 | 40~50 | 204 | 122.7 | 60~80 | |
| 125A | 127.0 | 176 | 125.0 ~ 129.0 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 60~80 | |
| 129.0 | 176 | 127.5 ~ 130.0 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 60~80 | ||
| 133.0 | 176 | 131.0 ~ 135.0 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 60~80 | ||
| 139.8 | 5 | 176 | 138.0 ~ 142.0 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 60~80 | |
| 141.3 | 176 | 139.5 ~ 143.5 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 60~80 | ||
| 150A | 154.0 | 201 | 151.5 ~ 155.5 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 60~80 | |
| 159.0 | 201 | 156.0 ~ 160.0 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 60~80 | ||
| 165.2 | 6 | 201 | 164.0 ~ 167.0 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 60~80 | |
| 168.3 | 201 | 166.0 ~ 170.0 | 28 | 117.7 | 55.3 | 60~80 | 204 | 128.5 | 120~150 | ||
| 200A | 200.0 | 256 | 198.0 ~ 203.0 | 24 | 155.4 | 72.6 | 120~150 | 256 | 157.8 | 120~150 | |
| 204.0 | 256 | 202.0 ~ 206.0 | 24 | 155.4 | 72.6 | 120~150 | 256 | 157.8 | 120~150 | ||
| 216.3 | 8 | 256 | 214.0 ~ 218.5 | 24 | 155.4 | 72.6 | 120~150 | 256 | 157.8 | 120~150 | |
| 219.1 | 256 | 216.5 ~ 221.5 | 24 | 155.4 | 72.6 | 120~150 | 256 | 157.8 | 120~150 | ||
| 250A | 254.0 | 300 | 251.0 ~ 257.0 | 20 | 155.4 | 66 | 120~150 | 256 | 157.8 | 120~150 | |
| 267.4 | 10 | 300 | 262.0 ~ 269.0 | 20 | 155.4 | 66 | 120~150 | 256 | 157.8 | 120~150 | |
| 273.1 | 300 | 270.0 ~ 276.0 | 20 | 155.4 | 66 | 120~150 | 256 | 157.8 | 170~190 | ||
| 300A | 304.0 | 350 | 301.5 ~ 308.0 | 14 | 155.4 | 66 | 170~190 | 256 | 157.8 | 170~190 | |
| 318.5 | 12 | 350 | 316.0 ~ 322.5 | 14 | 155.4 | 66 | 170~190 | 256 | 157.8 | 170~190 | |
| 323.9 | 350 | 322.0 ~ 328.0 | 14 | 155.4 | 66 | 170~190 | 256 | 157.8 | 170~190 | ||
| 350A | 355.6 | 14 | 400 | 352.0 ~ 360.0 | 14 | 155.4 | 66 | 170~190 | – | – | – |
Connect Pipe Clamps FAQ
1. What is the difference between Standard Type and Standard Type Long? Which one should I use?
The distance between the pipelines at both ends (denoted as S in the diagram) should not exceed the length B specified in the specification table.
If the pipelines cannot be moved, causing excessive distance, please use Standard Type Long connect pipe clamps to prevent leakage.
2. What is the maximum allowable difference in diameter between two pipes?
The maximum allowable difference in diameter between two pipes is 2 to 3 mm.
3. Can the clamps be used when the pipes are close to the wall or other pipes? What is the thickness of the clamps?
The clamp thickness can be calculated from the specification table: (T – Pipe Outer Diameter) / 2. For example, the clamp thickness for a standard pipe with a nominal size of 100A is calculated as (142-114.3)/2 = 13.9 mm.
4. Can pipes made from different materials be connected?
As long as pipe diameter is within range, all pipes can be connected regardless of their material.
5. Are the clamps applicable to all types of pipes?
Glass pipes and flexible hoses are not suitable for use. Sanitary pipes with food-grade liquids inside are also not suitable for use.
FAQ
What is the durability/lifespan of the pipe clamp?
Under normal operating conditions, the durability/lifespan of the pipe clamp can reach 15 to 20 years or more.
Will connect pipe clamps loosen due to earthquakes or shaking?
Pipe clamps feature serrated structures on both sides, allowing for secure grip on the pipeline and will not loosen even during earthquakes or vibrations.
Are pipe clamps reusable?
Yes they are reusable.
How do I select the required specifications?
Please measure the outer diameter of the pipe you intend to use and visit the connect pipe clamp specification page to select the appropriate specifications. If you are unsure about the specifications, you can consult directly with our sales representative.
What are your region of sales?
Currently we are able to provide service and free international shipping to the following countries and regions: Hong Kong, Vietnam, Thailand, Singapore and Malaysia.
Is there a minimum order quantity?
No. There is no minimum order quantity.
When is the earliest possible delivery date?
Product will be shipped on the day of orde if stick is available. Actual delivery date depends on shipping and custom condidtions.
Do I need to pay for shippping?
No. We offer free international shipping to all our sales regions.